Nutanix NCP-MCI-6.10 Practice Questions

An administrator is working with anetwork engineerto design thenetwork architecture for a DR failover.
BecauseDNS is well-designed, theDR site will use a different subnetbutretain the same last octetin the IP address.
What is the best way to achieve this?

A. Use a custom script to update the IP address after instantiation in DR.

B. Set up IPAM so the address is dynamically assigned during DR.

C. Manually log into VMs after the DR event and update the last octet.

D. Utilize Recovery Plan Offset-based IP mapping.

When expanding acluster, what is required toautomatically discover new nodes?

A. New nodes must have the same hypervisor version.

B. IPv6 multicast must be allowed on physical switches.

C. New nodes must have the same AOS version.

D. IPv4 multicast must be allowed on physical switches.

An administrator receives analert in Prismstating: "Storage container on cluster will run out of storage resources in approximately 1 day."
However, the cluster hasplenty of available space remaining.
What configuration setting is causing the container to run out of space while the cluster has space remaining?

A. Advertised Capacity is set too low.

B. Reserved Capacity is set too high.

C. Compression is set too low.

D. Replication Factor is set too high.

B. Reserved Capacity is set too high.

An administrator has configuredAHV Metro Availability with Witnessand is testing failover scenarios.
During testing, the administratordisconnects the primary and recovery clustersbutPrism Central remains connected to the recovery site.
What are two expected system behaviors? (Choose two.)

A. Guest VM I/O operations pause (freeze) until connectivity is restored.

B. Guest VM I/O operations pause (freeze) until connectivity between Prism Central and the primary site is restored.

C. Guest VMs failover automatically to the recovery cluster.

D. Guest VMs continue to run on the primary cluster.

A. Guest VM I/O operations pause (freeze) until connectivity is restored.

C. Guest VMs failover automatically to the recovery cluster.

An administrator observes an alert in Prism for ahybrid SSD/HDD cluster:
"Storage Pool SSD utilization consistently above 75%."
What is the potential impact of this condition?

A. The cluster is unable to sustain an SSD disk failure.

B. The cluster may be nearly out of storage for metadata.

C. The cluster is at risk of entering a read-only state.

D. Average I/O latency in the cluster may increase.

What feature allows receiving a weekly message about infrastructure performance summary?

A. Admin Center Life Cycle Manager

B. Prism Central Syslog

C. Infrastructure VMs List

D. Intelligent Operations Reports

Page 1 out of 12 Pages

About Nutanix NCP-MCI-6.10 Exam

Nutanix offers official training courses to help you prepare Nutanix core infrastructure administration and Nutanix advanced administration and optimization. Set up a lab environment to practice deploying, configuring, and managing Nutanix clusters. Prepare Nutanix NCS-Core practice questions and join Nutanix communities to ask questions and share knowledge.

Key Topics:

1. Manage VMs within a Nutanix Multicloud Environment
2. Manage Clusters within a Nutanix Multicloud Environment
3. Configure Disaster Recovery and Data Protection within a Nutanix Multicloud Environment
4. Troubleshoot a Nutanix Multicloud Environment
5. Conduct Custom Monitoring within a Nutanix Multicloud Environment

To prepare for the NCP-MCI 6.10 exam, it is recommended to complete the Nutanix Enterprise Cloud Administration course. Use practice tests to get a feel for the types of questions that will be on the exam. You can find Nutanix NCP-MCI-6.10 practice questions at Nutanixacademy.com. Reviewing official Nutanix documentation and guides can help reinforce your understanding of key concepts and procedures. Nutanix University offers a playlist of instructional videos that cover technical demos and how-to guides relevant to the exam. Simply reading through study materials without hands-on practice can limit your understanding. Use a lab environment to practice real-world scenarios and reinforce your knowledge.