Nutanix NCP-MCI-6.10 Practice Questions

An administrator started anLCM upgrade of the AHV hostsbut realized that theupgrade would exceed the planned maintenance window.
Which feature should be leveraged to prevent additional updates from occurring?

A. Cancel the LCM tasks via theErgon command line (ecli).

B. Run thelcm_task_cleanup.pyscript.

C. RestartGenesison the cluster to restart the LCM service.

D. Use theStop Update feature in LCM.

An administrator receives analert in Prismstating: "Storage container on cluster will run out of storage resources in approximately 1 day."
However, the cluster hasplenty of available space remaining.
What configuration setting is causing the container to run out of space while the cluster has space remaining?

A. Advertised Capacity is set too low.

B. Reserved Capacity is set too high.

C. Compression is set too low.

D. Replication Factor is set too high.

Which update in LCM can an administrator apply on a per-node basis?

A. AOS

B. BMC

C. NCC

D. AHV

An administrator is managing a4-node clusterwithdifferent hardware generations:

Two G5 Nodes# 2 CPUs (12 cores), 1 SSD (1.92 TB), 2 HDDs (4 TB).
Two G7 Nodes# 2 CPUs (16 cores), 2 SSDs (1.92 TB), 4 HDDs (4 TB).
The cluster will bedecommissioned from productionand used forDisaster Recovery (DR) purposeswithan RPO of 1 hour.
What is the best approach when replacing G5 nodes without impacting performance?

A. New node must have at least 2 SSDs.

B. New node must be G7 or G8.

C. New node must have 2 CPUs with 12 cores.

D. New node must be hybrid.

How can a VM or Volume Group (VG) be associated with a Storage Policy?

A. Assign the Storage Policy directly on the VM or VG.

B. Assign the VM or VG directly to the Storage Policy.

C. Migrate the VM or VG to the Storage Container assigned to the Storage Policy.

D. Assign the VM or VG to the same Category as the Storage Policy.

An administrator needs to perform anLCM upgradeon anAHV host with GPUs.
What additional step is required before upgrading the host?

A. Create an agent VM on each host that has GPU drivers installed.

B. Run LCM in dark site mode so it can update AHV independently.

C. Use Direct Uploads to upload appropriate driver bundles.

D. Update NCC to the latest version and re-run Inventory.